Maintenance—Every 10 Hours or Daily Grease Hydraulic Coupler (If Equipped) NOTE: Cylinders that are supplied without grease zerks do NOT need to be greased. To keep hydraulic coupler in proper working condition it must be greased on a daily basis. Most hydraulic couplers are supplied with a grease zerk located on the head end of the cylinder or the cylinder barrel, the lock arm and on each side of the hydraulic coupler for the locking wedge. Apply grease to lubrication fittings until it escapes from joints. See Grease. (Section 3-1.) TX1017854A –UN–22JAN07 1—Hydraulic Cylinder Grease Zerk 2—Lock Arm Grease Zerk 1 2 TX1017855 –UN–25JAN07 VD76477,0001376 –19–27JUN07–1/1 3-4-6 010609 PN=143