Maintenance—Every 250 Hours Drain Hydraulic Tank Sump CAUTION: High pressure release of oil from pressurized system can cause serious burns or penetrating injury. Relieve pressure by pushing pressure release button (1). TX1001796A –UN–12JAN06 1. To relieve pressure, push the pressure release button (1). 2. Insert a 5 mm hex wrench to remove cap screws (3). 3. Remove cover. 1—Pressure Release Button 2—Hydraulic Oil Tank Cover 3—Cap Screws (4 used) TX1001798A –UN–21DEC05 DW90712,0000015 –19–31OCT06–1/2 4. After oil is cool, loosen the drain valve plug (4), and open the ball valve (5) for several seconds to drain water and sediment into a container. Do not remove plug completely.
Dispose of waste properly. 5. Close the ball valve (5), and tighten the drain valve plug (4). TX1001824A –UN–22DEC05 6. Install hydraulic oil tank cover and cap screws. 4—Drain Valve Plug 5—Ball Valve DW90712,0000015 –19–31OCT06–2/2 3-6-11 010609 PN=155