Maintenance—Every 1000 Hours Change Swing Gearbox Oil 1. Remove drain plugs (4) mounted at end of drain hoses. 2. Open drain valves (3) to drain oil. Allow oil to drain into a container. Dispose of waste oil properly. 3. Close drain valves. 4. Install drain plugs. 5. Remove filler caps (2) from fill tubes. TX1002170A –UN–04JAN06 6. Add oil until oil is between marks on dipstick (1). (See Section 3-1.) 450DLC—Specification Swing gearbox—Oil Capacity (each) 6.5 L ..................................................................................................
1.7 gal 650DLC—Specification Swing gearbox—Oil Capacity (each) 10.5 L ................................................................................................ 2.8 gal 850DLC—Specification Swing gearbox—Oil Capacity (each) 15 L ................................................................................................... 4 gal T147522 –UN–01NOV01 7. Install filler caps. 1—Dipstick 2—Filler Cap 3—Drain Valve 4—Drain Plug VD76477,000040E –19–03JUL07–1/1 Remove and Clean Engine Crankcase Ventilation Tube 1. Remove and clean the engine crankcase vent tube (1). 2. Install tube.
TX1001952A –UN–03JAN06 1—Engine Crankcase Ventilation Tube VD76477,00003FB –19–06FEB06–1/1 3-8-1 010609 PN=166