John Deere 450DLC, 650DLC, and 850DLC Excavators — Replace Hydraulic Tank Cap Breather Element

Maintenance—Every 1000 Hours 2. Remove filter (1). 3. Clean O-ring gasket contact area. 4. Apply a thin film of clean oil to the O-ring on the new filter. TX1002203A –UN–04JAN06 5. Install filter. Specification Filter—Torque 20-30 (15-22 lb-ft) ........................................................ 6. Bleed air from hydraulic system. (See Bleed Air From Hydraulic System in Section 3-7.) 650DLC Shown 7. Check for any leakage. 1—Filter 8. Check oil level. DW90712,0000021 –19–07FEB06–2/2 Replace Hydraulic Tank Cap Breather Element CAUTION: To prevent possible burn injury from hot hydraulic oil, wait for hydraulic oil to cool before starting work. T6811AI –UN–18OCT88 1.

Park machine on solid level surface as shown at right. Stop engine. CAUTION: High pressure release of oil from pressurized system can cause serious burns or penetrating injury. Relieve by pushing pressure release button (1). 2. Push the pressure release button (1). TX1002572A –UN–12JAN06 1—Pressure Release Button Continued on next page DW90712,000004A –19–23JAN06–1/2 3-8-7 010609 PN=172