John Deere 450DLC, 650DLC, and 850DLC Excavators — Change Travel Gearbox Oil

Maintenance—Every 2000 Hours Change Travel Gearbox Oil 1. Park the machine on level ground rotating travel gearbox until positioned as shown. 2. Stop engine. TX1000270 –UN–15NOV05 CAUTION: High pressure release of oils from pressurized system can cause serious burns. Wait for travel gearbox oil to cool. Keep body and face away from check plug (2). Gradually loosen check plug to release pressure. 1—Fill Plug 2—Check Plug 3—Drain Plug 3. After travel gearbox has cooled, slowly loosen check plug (2) to release pressure. 450DLC—Specification Travel Gearbox—Oil Capacity (each) 11 L ...................................................................................................

2.9 gal 650DLC—Specification Travel Gearbox—Oil Capacity (each) 16 L ................................................................................................... 4.2 gal 850DLC—Specification Travel Gearbox—Oil Capacity (each) 19 L ................................................................................................... 5 gal 4. Remove drain plug (3). Allow oil to drain into a container. Dispose of waste oil properly. 5. Wrap threads of drain plug with a sealing-type tape. Install plug. Tighten plug to 70 (51 lb-ft). 6. Remove oil fill plug (1). 7. Add oil until oil flows out of oil level check plug hole. 8. Wrap threads of check plug, and fill plug with sealing-type tape.

Install plugs. Tighten plugs to 70 (51 lb-ft). 9. Change oil of second travel gearbox. DW90712,000004B –19–03JUL07–1/1 3-9-1 010609 PN=175