Maintenance—Every 2000 Hours Drain Cooling System IMPORTANT: Avoid mixing different brands or types of coolant. Coolant manufacturers engineer their coolants to meet certain specifications and performance requirements. Mixing different coolant types can degrade coolant and machine performance. CAUTION: Prevent possible injury from hot spraying water. DO NOT remove radiator filler cap unless engine is cool. Then turn cap slowly to the stop. 3. Release air to relieve pressure. Remove filler cap. Specification 450DLC—Refill Capacity 45.4 L ...........................................................
12.0 gal 650DLC—Refill Capacity 57.0 L ........................................................... 15.1 gal 850DLC—Refill Capacity 116 L ............................................................ 30.6 gal Drain and flush cooling system using commercial products, replace radiator cap, and refill with new coolant. 1. Check coolant hoses for cracks and leaks. Replace if necessary. 4. Remove access panel under radiator. 2. Check radiator and oil cooler for dirt, grease, leaks, and loose or broken mountings. Clean radiator and oil cooler fins. Continued on next page VD76477,00003F8 –19–04JAN06–1/2 3-9-2 010609 PN=176