John Deere 450DLC, 650DLC, and 850DLC Excavators — Extending the Side Frame

Miscellaneous—Transporting—650DLC CAUTION: Slowly operate the boom, or the lever block and/or cable or chain may be damaged and may disengage, possibly causing severe personal injury. Stay away from the machine when operating the boom. T122566 –UN–05AUG99 9. Slowly slacken cable or chain tension by operating lever blocks (E) and raise the boom to lower the track frame (B). 10. After lowering track frame, tighten cap screws (A) by hand. 11. Repeat steps (9) and (10) three to four times until the track frame is completely lowered to the ground. 12. Slacken the lever blocks. Remove the lever blocks and cables or chains. IMPORTANT: Be sure to apply a film of lubricant to the cap screw threads.

T122567 –UN–05AUG99 13. Tighten cap screws with the power boost wrench and torque wrench to specification. Specification 650DLC Side Frame Cap Screw—Torque 2800 ........................................................................... 2030 lb-ft A—Cap Screw B—Track Frame C—Side Frame D—Guide Cap Screw E—Lever Block 14. Extend the side frame (C) on the opposite side using the same procedure. AM40430,0000305 –19–18JAN07–5/5 4-3-14 010609 PN=229 Torque Model Bolt Size Width Across Flats (mm) N•m kgf-m 650DLC M33-Pitch 3 50 2800 286