Miscellaneous—Transporting—850DLC Transporting the Machine by Trailer Understand and follow all local regulations when transporting the machine on public roads 1. For transporting using a trailer, check the width, height, length, and weight of the trailer when the machine is loaded. T122568 –UN–05AUG99 2. In some cases, disassemble the machine to bring it within dimensional limits or weight limits of local regulations. 3. Retract the side frame before loading the machine onto trailer bed. (See “Retracting or Extending the Side Frame” in this chapter.) Loading/Unloading On A Trailer Always load and unload the machine on a solid, level surface. Ramp/Loading Dock CAUTION:
Be sure to use a loading dock or a ramp for loading/unloading. 1. Before loading, thoroughly clean the ramp and flatbed. 2. Place chock blocks against the truck and trailer wheels while using a ramp or loading dock. 3. Ramps must be sufficient in width, length, and strength. Be sure that the incline of the ramp is less than 15 degrees. 4. Loading docks must be sufficient in width and strength to support the machine and have a gradient of less than 15 degrees. Continued on next page AM40430,0000306 –19–31OCT06–1/2 4-4-1 010609 PN=230