Miscellaneous—Machine Assembly Precautions for Assembling 1. Worker’s Clothing 7. Cap Screw Tightening Torque Specifications: Wear clothing appropriate for the job. 450DLC—Specification Counterweight Mounting Cap Screw—Torque 2400 .................................................................... 1735 lb-ft Counterweight Lock Plate Securing Cap Screw—Torque 450 ............................................... 325 lb-ft Pin Lock Securing Cap Screw—Torque 400 ...................................................................... 290 lb-ft Wear safety equipment. 2. Conferring Work Process Discuss with all personnel, the work process, the role assigned to each, and precautions to ensure safety.
3. Coordinating Signal System, and Appointing Signal Person 650DLC—Specification Counterweight Mounting Cap Screw—Torque 2800 .................................................................... 2065 lb-ft Counterweight Lock Plate Securing Cap Screw—Torque 700 ............................................... 510 lb-ft Boom Hose Connecting Cap Screw—Torque 180 ...................................................................... 130 lb-ft Track Frame Support Cap Screw—Torque 2156 .................................................................... 1590 lb-ft Before starting, be sure to coordinate the signal system to be used. Appoint one qualified signal person.
All workers should obey the signals only from one signal person. 4. Secure a flat space big enough to assemble the machine. 850DLC—Specification Counterweight Mounting Cap Screw—Torque 2800 .................................................................... 2065 lb-ft Counterweight Lock Plate Securing Cap Screw—Torque 700 ............................................... 510 lb-ft Boom Hose Connecting Cap Screw—Torque 180 ...................................................................... 130 lb-ft Side Frame Cap Screw— Torque 2 750 ................................................................................. 2030 lb-ft 5.
Check that footing is strong enough to support the machine weight. If required, repair the footing sufficiently so that the machine can be kept in a horizontal position. 6. Before starting, make sure you have all necessary tools. Essential Equipment and Tools A 25-ton class lifting capacity crane Cables or chains to lift the machine Shackles Lifting protectors (Soft Pads) 100 mm (4 in) square lumber 10 pound hammer Standard tools Grease 8. Precautions for Tightening Cap Screws Use a torque wrench to tighten cap screws to specifications. After tightening cap screws to specifications, mark the tightened cap screw head to ensure that all the cap screws have been tightened.
Continued on next page DW90712,000007C –19–15FEB06–1/2 4-5-1 010609 PN=244