Miscellaneous—Machine Assembly Be sure to use original size cap screws. If the cap screw length is too long or short, the cap screw will not be tightened correctly, possibly inducing an accident. DW90712,000007C –19–15FEB06–2/2 Precautions for Lifting Work 1. Coordinating Signal System, and Appointing Signal Person Always use a hook with a latch. Use only lifting cables and chains that are strong enough. Never allow the lifted load to pass over any persons. Never allow anyone under the lifted load. Before starting, be sure to coordinate signal system to be used. Appoint one qualified signal person only. All workers should obey signals only from one signal person. 4.
Fix Twisted Cable or Chain. 2. When attaching a cable or chain to the lifting parts/components, always use lifting protectors between the cable or chain and the lifting parts/components. Fix cables or chains after the job, if necessary. Store the cables or chains in a specified place. 3. Precautions for Lifting CED,TX03679,5433 –19–24JAN07–1/1 Precautions for Operating Machine 1. General Precautions for Operating Machine Always be alert for the safety of bystanders. Before driving the machine, find out which way to move the travel levers for the direction you want to drive the machine. Always sit in operator’s seat when operating the machine.
Before starting the engine, or driving or swinging the machine, check that there are no bystanders or obstructions around the machine. Use the horn or other signals to warn the bystanders. If sight is obstructed, be sure to use a signal person. Always keep the signal person in view. Thoroughly learn the meanings of all signs and signals. Appoint one qualified signal person. 3. Avoid injury from Backover and Swing Accidents During swing or backing up operation, operator’s sight is obstructed, leading to a potential accident. If sight is obstructed, use a signal person. Check that bystanders are away from the operating area of the machine before swinging or backing up the machine. 2.
Driving the Machine Safely CED,OUOE003,9807 –19–24JAN07–1/1 4-5-2 010609 PN=245