John Deere 450DLC, 650DLC, and 850DLC Excavators — Installing Boom Cylinder

Miscellaneous—Machine Assembly 650DLC—Specification Boom Cylinder Head End Pin— Weight 38 kg approximate ........................................................................... 83 lb approximate 850DLC—Specification Boom Cylinder Head End Pin— Weight 43 kg approximate ........................................................................... 95 lb approximate DW90712,0000076 –19–09FEB06–2/7 4. Align the boom cylinder bottom hole with the boss hole on the frame. Measure clearance (1). If clearance is 4 mm (0.16 in.) or more, remove the shim (2) on the pin (3) and install it, as illustrated. 5. Tighten cap screw (F) to secure pin lock plate (A).

TX1003543 –UN–10FEB06 Specification Pin Lock Plate Cap Screw— Torque 400 .......................................................................................... 290 lb-ft 6. After installing the left boom cylinder to the main frame, lay the rod of the boom cylinder onto a support stand (G). 1—Clearance 2—Shim 3—Pin 7. Install the right side boom cylinder in the same procedure as taken in the steps 1 to 5 above. DW90712,0000076 –19–09FEB06–3/7 8. To relieve pressure, push the pressure release button (1). 1—Pressure Release Button 2—Hydraulic Oil Tank Filter Cover TX1003485A –UN–08FEB06 Continued on next page DW90712,0000076 –19–09FEB06–4/7 4-5-5 010609 PN=248