John Deere 450DLC, 650DLC, and 850DLC Excavators — Operational Checks—Key Switch ON, Engine ON Checks

4-6-18 010609 PN=282 Miscellaneous—Operational Checkout Swing Dynamic Braking Check T6479AY –UN–19OCT88 1—Engine Speed Dial 2—Auto-Idle Switch 3—Power Mode Switch CAUTION: Make sure area is clear and large enough to swing extended arm and bucket. Machine must be on level ground. Position upperstructure with boom to the front. TX1000170 –UN–10NOV05 Move arm to the extended position, bucket to the retracted position, and bucket-to-arm pivot pin at same level as boom-to-frame pivot pin. Turn engine speed dial (1) to fast idle (H) position. Turn power mode switch (3) to P (power) mode. Fully actuate swing function. Swing clockwise 90 degrees and then release lever. LOOK:

Does upperstructure stop within 45 degrees (1/8 turn) or less after releasing lever? Position upperstructure with boom to the front. Fully actuate swing function. Swing counterclockwise 90 degrees and then release lever. LOOK: Does upperstructure stop within 45 degrees (1/8 turn) or less after releasing lever? YES: Go to next check. NO: See your authorized dealer. – – –1/1