4-6-26 010609 PN=290 Miscellaneous—Operational Checkout Travel System Tracking Check T6998AS –UN–23MAR89 1—Engine Speed Dial 2—Auto-Idle Switch 3—Power Mode Switch 4—Travel Speed Switch Turn engine speed dial (1) to fast idle (H) position. Turn power mode switch (3) to P (power) mode. Turn travel speed switch (4) to fast speed (rabbit) mode. Operate machine at full speed forward on a flat and level area about 20 m (65 ft.). Repeat procedure in reverse travel. Observe which direction and how much the machine mistracks from a straight line. LOOK: Does machine mistrack less than 200 mm (7 7/8 TX1000744 –UN–29NOV05 in.)? YES: Go to next check. NO: See your authorized dealer.
– – –1/1 Travel System Tracking Checks While Operating a Dig Function 1—Engine Speed Dial 2—Auto-Idle Switch 3—Power Mode Switch 4—Travel Speed Switch NOTE: Machine will slow down during this test. Turn engine speed dial (1) to fast idle (H) position. Turn travel speed switch (4) to fast speed (rabbit) mode. Operate machine at full speed forward on a flat and level surface. After machine is moving, actuate arm out from neutral to full actuation and extend the arm. LOOK: Does machine mistrack excessively when the arm is extended? TX1000744 –UN–29NOV05 YES: See your authorized dealer. NO: Go to next check. – – –1/1