4-6-25 010609 PN=289 Miscellaneous—Operational Checkout Bucket Regenerative Valve Operation Check 1—Engine Speed Dial 2—Auto-Idle Switch 3—Power Mode Switch Turn engine speed dial (1) to fast idle (H) position. Turn power mode switch (3) to P (power) mode. Actuate boom up, arm out and bucket dump functions. TX1000170 –UN–10NOV05 Actuate boom down function, arm in function and then the bucket curl function. LOOK: Does the bucket move smoothly through the complete cycle and not hesitate when it goes to the curl position? YES: Go to next check. NO: See your authorized dealer.
– – –1/1 Travel Speed Selection Check 1—Engine Speed Dial 2—Auto-Idle Switch 3—Power Mode Switch 4—Travel Speed Switch Turn engine speed dial (1) to fast idle (H) position. Turn travel speed switch (4) to slow speed (turtle) mode. Actuate travel function to full speed. Turn travel speed switch (4) to fast speed (rabbit) mode. LOOK: Does machine travel speed increase? Actuate a dig function and then return to neutral. LOOK: Does machine travel speed decrease and then increase as dig function is actuated and then released? TX1000744 –UN–29NOV05 Turn travel speed switch (4) to slow speed (turtle) mode. LOOK: Does machine travel speed decrease? YES: Go to next check. NO:
See your authorized dealer. – – –1/1