John Deere 450DLC, 650DLC, and 850DLC Excavators — Operational Checks—Key Switch ON, Engine ON Checks

4-6-24 010609 PN=288 Miscellaneous—Operational Checkout Boom Regenerative Valve Operation Check 1—Engine Speed Dial 2—Auto-Idle Switch 3—Power Mode Switch Turn engine speed dial (1) to fast idle (H) position. Turn power mode switch (3) to P (power) mode. Raise boom and extend the arm to full extension. TX1000170 –UN–10NOV05 Actuate the boom down, then arm in and boom up functions in combined operation. LOOK: Does the boom move smoothly through the complete cycle down and up and not hesitate when it goes past the vertical position? YES: Go to next check. NO: See your authorized dealer.

– – –1/1 Arm Regenerative Valve Operation Check 1—Engine Speed Dial 2—Auto-Idle Switch 3—Power Mode Switch Turn engine speed dial (1) to fast idle (H) position. Turn power mode switch (3) to P (power) mode. Extend the arm to full extension and then lower boom so bucket is on the ground. TX1000170 –UN–10NOV05 Actuate the boom up and arm in functions in combined operation. LOOK: Does the arm move smoothly through the complete cycle and not hesitate when it goes through the vertical position? YES: Go to next check. NO: See your authorized dealer. – – –1/1