John Deere 450DLC, 650DLC, and 850DLC Excavators — Counterweight Removal

Operation—Operating the Machine CAUTION: Avoid personal injury from unexpected counterweight movement. DO NOT go directly under machine counterweight to remove or install counterweight covers or hardware. Enter the work area only from either SIDE of counterweight. T8172AE –UN–20FEB94 IMPORTANT: Do not attempt to remove or install counterweight with the track gauge in the narrow (transport) position. Before removing or installing the counterweight, the track gauge must be widened to the work position. To change the track gauge, see procedure in this section. A—Cap Screw B—Cover Plate 4. Remove cap screws (A) to remove counterweight top cover plate (B). DW90712,00001F0 –19–12SEP08–2/12 5.

Remove bottom covers (C and E). 6. Remove counterweight lift cylinder lower guard. C—Bottom Cover D—Lifting Device E—Bottom Cover T8175AK –UN–20FEB94 View looking up from below machine Continued on next page DW90712,00001F0 –19–12SEP08–3/12 2-3-16 010609 PN=86