Track System TM1859 (14JUL04) 01-0130-51 700H Crawler Dozer 071404 PN=101 25. As chain is being assembled, check to make sure there is some clearance between the overlapping face of links using a feeler gauge. If links contact each other, check bushing projection. Specification Track Pin Bushing—Projection................ 3.02 ± 0.25 mm (0.119 ± 0.010 –UN–27OCT88 in.) 26. Repeat steps 14—25 to assemble rest of chain. T96286 27. The last link assembled is the split link pin ends. Assemble a set of extra "slave" split link bushing ends to pin ends using bolts and washers used in step 15. Tighten bolts just enough to hold together link. 28.
Install assembled split links on ram plungers and advance rams to press split links together. 29. Install track shoes. (See Remove and Install Track Shoes in this group.) 30. Install lubricated track chain. (See Remove and Install Lubricated Track Chain in this group.) CED,TX03399,5954 –19–24MAR00–11/11 01 0130 51