Inspect Metal Face Seals Track System 1. Inspect for the following conditions to determine if seals can be reused: 01 0130 58 The narrow, highly polished sealing area (E) must be in the outer half of seal ring face (D). Sealing area must be uniform and concentric with the ID and OD of seal ring (A). Sealing area must not be chipped, nicked, or scratched. A—Seal Ring B—Worn Area (shaded area) C—Seal Ring Face D—Outer Half of Seal Ring Face E—Sealing Area (dark line) T85079 –UN–24AUG93 CED,TX03399,5968 –19–24MAR00–1/3 2. Illustration shows examples of worn seal rings (A). I—Sealing area (D) is in inner half of seal ring face (C). II—Sealing area (D) not concentric with ID and OD of seal ring.
T85080 –UN–05DEC96 A—Seal Ring B—Worn Area (shaded area) C—Inner Half of Seal Ring Face D—Sealing Area (dark line) Continued on next page CED,TX03399,5968 –19–24MAR00–2/3 TM1859 (14JUL04) 01-0130-58 700H Crawler Dozer 071404 PN=108