Axle Shaft, Bearings, and Reduction Gear NOTE: Install second idler pinion gear assembly (2) after final drive gear (1) is lowered halfway into position. 37. Install final drive gear (1). T118855B –UN–11DEC98 1—Final Drive Gear 2—Second Idler Pinion Gear Assembly 02 0250 8 CED,TX03399,5970 –19–24MAR00–17/26 CAUTION: DO NOT heat oil over 182 ° C (360 ° F). Oil fumes or oil can ignite above 193 ° C (380 ° F). Use a thermometer. DO NOT allow flame or heater element to come in direct contact with the oil. Heat oil in a well ventilated area. 38. Heat bearing cone (1) and install.
T81191 –UN–23FEB89 1—Bearing Cone T133210B –UN–21AUG00 Continued on next page CED,TX03399,5970 –19–24MAR00–18/26 TM1859 (14JUL04) 02-0250-8 700H Crawler Dozer 071404 PN=138