John Deere 700H Crawler Dozer — Disassemble and Assemble

Axle Shaft, Bearings, and Reduction Gear 46. Measure cover bearing surface height. 47. Measure distance between housing and bearing cone. Subtract bearing cone height from cover height. Select shims to achieve specified preload. Final Drive—Specification Final Drive Pinion Shaft— Preload-End Play 0.076 mm (0.003 in.) preload—0.076 mm (0.003 in.) end play T133328B –UN–21AUG00 ...................................................... 02 0250 48. Install O-ring . 10 49. Install cover (1) with cap screws (2) and tighten to specifications. Final Drive—Specification Final Drive Secondary Pinion Shaft Cover Cap Screws—Torque 73 (54 lb-ft) ..................................

T133329B –UN–21AUG00 1—Cover 2—Cap Screw (4 used) T133330B –UN–21AUG00 Continued on next page CED,TX03399,5970 –19–24MAR00–22/26 TM1859 (14JUL04) 02-0250-10 700H Crawler Dozer 071404 PN=140