Disassemble and Assemble Displacement Control Valve Hydrostatic System 03 0360 24 T119680B –UN–19JAN99 1—Control Valve Housing 5—O-Ring (1 used) 10—Link Arm 13—Spring 2—Cap Screw (4 used) 6—Cap 11—Override Linkage 14—Valve Spool 3—Pressure Control Pilot 7—Spring Assembly 15—Cap (PCP) 8—Valve Spool 12—Cap Screw (2 used) 16—Adjustment Screw 4—O-Ring (3 used) 9—Feedback Link IMPORTANT: Hydrostatic pump displacement control valve is serviced as an assembly. Replace if damaged. Disassemble for cleaning purposes only. NOTE: The Pressure Control Pilot (PCP) (3) is serviced as an assembly. DO NOT disassemble. 2. Remove cap (15) and valve spool (14). Replace O-ring.
Absolute cleanliness is essential when working on hydraulic components. 3. Remove cap (6), spring (7), and valve spool (8). Replace O-ring. 1. 4. Loosen adjusting screw (16) to release tension on spring (13). Remove the six socket head cap screws and displacement control valve (1) from the pump housing. 5. Remove caps screws (12). TM1859 (14JUL04) 03-0360-24 700H Crawler Dozer Continued on next page CED,OUO1008,149 –19–13APR99–1/3 071404 PN=214