John Deere 700H Crawler Dozer — Disassemble

Hydrostatic System 31. Remove piston rings (1) from pistons (4) using a small pair of retaining ring pliers and an O-ring pick. IMPORTANT: When installing new spherical piston rings, the spherical surface (3) MUST conform to the shape of the piston. A radial identification mark (2) is provided on the outer edge of the piston ring. 32. Install new piston rings on pistons. The ends of each piston ring MUST NOT overlap each other. NOTE: Shaft assembly with exception to the piston rings is serviced as an assembly.

03 0360 48 1—Piston Ring 2—Identification Mark 3—Spherical Surface 4—Piston T8506AE –19–10JUL95 TM1859 (14JUL04) 03-0360-48 700H Crawler Dozer Continued on next page CED,TX03399,5991 –19–28JUN02–9/11 071404 PN=238