Cold Weather Starting Aids TM1859 (14JUL04) 05-0505-3 700H Crawler Dozer 071404 PN=281 5. Install new gasket (A) on heater element and a new O-ring (B) on adapter (C). Install heater element through adapter, and install nut (D), but do not tighten. 6. Install heater into cylinder block with element pointing to the flywheel. –UN–21OCT88 7. Tighten adapter (C). 8. Turn element clockwise and then counterclockwise T87072 until element contacts casting. Move element midway between contact points. A—Gasket 9. Hold element with a wrench and tighten lock nut (D) to B—O-Ring specification.
C—Adapter D—Nut Engine Coolant Heater—Specification Engine Coolant Heater Element Nut—Torque.................................................................... 34 N•m (25 lb-ft) 10. Connect cord to heater. Install engine side shield. 11. Fill radiator and engine block with coolant. (See Fuel and Lubricants in Operator’s Manual.) CED,TX03399,6009 –19–24MAR00–3/3 05 0505 3