John Deere 700H Crawler Dozer — Remove and Install

Remove and Install Starting Aid—If Equipped Cold Weather Starting Aids 1. Remove right hand side shield. 2. Disconnect starting aid tube (1). NOTE: When removing nozzle note the location of red dot when removing. T131016B –UN–16MAY00 3. Remove nozzle (2) from holder in air inlet. 4. Clean or replace nozzle holder as required. NOTE: Red dot (2) on nozzle holder must be installed at the 12 o’clock position, facing the incoming air flow. Nozzle orifice (3) needs to be in the path of the air flow to disperse fluid for quick start of engine. 5. Install nozzle and connect starting aid tube. T117496B –UN–13OCT98 6. Install engine side shield.

1—Starting Aid Tube 2—Red Dot for Nozzle Installation 3—Orifice 05 0505 4 CED,TX03399,6010 –19–24MAR00–1/1 TM1859 (14JUL04) 05-0505-4 700H Crawler Dozer 071404 PN=282