John Deere 700H Crawler Dozer — Disassemble and Assemble

Hydraulic System TM1859 (14JUL04) 11-1160-3 700H Crawler Dozer 071404 PN=333 Disassemble and Assemble Park Brake NOTE: Park brake disks and plates can be removed without removing final drive. DFT1212 will compress spring tension and hold disks and plates to remove park brake housing. –UN–17AUG00 1. If final is to be removed, drain oil from final drive. The approximate capacity of final drive is 13.2 L (14 qt.). T133147B CAUTION: Final drive assembly weighs approximately 470 kg (1036 lbs). Use proper lifting equipment and safety precautions. 1—Park Brake Failure to do so may cause personal injury. Final Drive—Specification Final Drive Assembly—Weight...................

470 kg (1036 lb) Approximate 2. Block and support final drive on heavy-duty bench (if removed). 3. Remove hub from park brake if not removed. 4. Install DFT1212 to compress springs and hold park brake disks and plates. (See DFT1212 Park Brake Spring Compressor in Section 99 for instructions to make tool. 5. Remove brake assembly nuts and washers (1). 6. Remove park brake housing (2). Continued on next page CED,TX03399,6027 –19–15NOV00–1/5 11 1160 3