John Deere 700H Crawler Dozer — Disassemble and Assemble

Hydraulic System IMPORTANT: Valve spool O-rings can be damaged during installation if allowed to travel beyond edges of valve ports. After installing O-ring (9) on valve, install spool into housing only until groove for O-ring (2) passes edge of housing. 14. Install end cap (8) and tighten. 15. Install ball joint (1) approximately 13 turns into spool and tighten lock nut. 16. Install ball switch (4) and tighten. 12. Install spool into valve housing from end cap side, until groove for O-ring (2) just clears housing. Brake Valve‘—Specification End Cap on Valve Housing— Torque 45 (33 lb-ft) ....................................................................... 13.

Install O-ring (2) onto spool and insert spool until O-ring enters bore of valve housing. 17. Install fittings (3) in position as marked during removal. CED,TX03399,6026 –19–28MAR00–2/2 11 1160 2 TM1859 (14JUL04) 11-1160-2 700H Crawler Dozer 071404 PN=332