Disassemble and Assemble Brake Valve Hydraulic System T119469C –UN–11JUL00 1—Ball Joint 4—Ball Switch 7—Socket Head Cap Screw 10—Brake Valve Housing 2—O-Ring 5—Spool Valve 8—End Cap 11—Orifice 3—Fitting (3 used) 6—Washer 9—O-Ring 1. Mark position of hydraulic fittings (3) to aid in assembly, and remove. Inspect orifice (11). 8. Lubricate parts with clean hydraulic oil. 9. Install O-ring (9) on spool (5). 2. Remove ball switch (4). 3. Loosen lock nut on ball joint (1) and remove joint from housing. 10. Install washer (6). 11 1160 1 11. Clean threads of socket head cap screw (7). Apply cure primer and thread lock and sealer (medium strength) to threads of socket head cap screw (7).
Install into spool and tighten. 4. Remove spool end cap (8). 5. Remove spool (5) from housing. 6. Remove socket head cap screw (7), washer (6) and O-rings (9) and (2) from spool. Brake Valve—Specification Spool Socket Head Cap Screw—Torque 9.5 (84 lb-in.) ..................................................... 7. Clean and check spool and valve for nicks or scratches. TM1859 (14JUL04) 11-1160-1 700H Crawler Dozer Continued on next page CED,TX03399,6026 –19–28MAR00–1/2 071404 PN=331