Operator s Enclosure TM1859 (14JUL04) 18-1810-1 700H Crawler Dozer 071404 PN=413 Remove and Install Slide Glass –19–14JAN99 T119610 1. Move the slide glass to the closed position. bottom channel and be removed by tilting the bottom toward the inside of the window. 2. Starting at the front of the window, begin removing the flocked rubber from the channel behind the 4. Install new glass with the bottom of the glass tilted glass at the top front of the window (approximately toward the inside of window. Lift window up into the 76 mm (3 in.) of this section of rubber extends open channel at the top of the window until the under the glass).
Slide this portion out in order to bottom of the glass can be inserted into the bottom completely remove flocked rubber section. channel. 3. Slide the glass to the front of the window and lift it 5. Slide the glass into the rear section of flocked up into the open channel left by removing the rubber still in the frame and move it to the closed flocked rubber. This will allow the glass to clear the position. Continued on next page CED,TX03399,6048 –19–29MAR00–1/2 18 1810 1