John Deere 700H Crawler Dozer — Remove and Install

Heating and Air Conditioning 6. Disconnect lines and bracket from expansion valve (14). 7. Remove two screw (12) and remove expansion valve 8. Remove bracket (13). T118221B –UN–03NOV98 9. Remove two cap screw and remove plate (10). 10. Remove cover (11) and remove evaporator or heater core. 10—Plate 11—Evaporator/Heater Core Cover 12—Cap Screw (2 used) 13—Bracket 14—Expansion Valve Continued on next page CED,OUTX547,182 –19–16APR99–3/4 TM1859 (14JUL04) 18-1830-35 700H Crawler Dozer 071404 PN=479 3. Disconnect (1, 2, 4—6, 8 and 9). 4. Remove cap screw (3) on both sides. 5. Remove eight cap screws (7) and remove A/C and heater assembly.

3NOV98 –UN–0 1—Receiver-Dryer Hose-to-Condenser 2—Receiver-Dryer Hose from Evaporator 3—Cap Screw (2 used) T118219B 4—Two Heater Hoses-to-Under the Seat Heater Core 5—A/C Harness Connector-to-Cab Harness Connector 6—Expansion Valve Hose-to-Compressor 7—Cap Screw (8 used) 8—A/C Blower Fans and Switch Connector 9—Low Pressure Switch Connector –UN–05NOV98 T118220B CED,OUTX547,182 –19–16APR99–2/4 18 1830 35