John Deere 700H Crawler Dozer — Remove and Install

Remove and Install Condenser Heating and Air Conditioning NOTE: Anytime air conditioning system is discharged, a new receiver-dryer must be installed. If servicing the condenser fans do not disconnect condenser hoses. Remove condenser and lay to the side. T118149B –UN–02NOV98 18 1830 38 1. Remove bottom cover. 2. Recover air conditioning system. (See R134a Refrigerant Recovery, Recycling and Charging Station Installation Procedure in this group.) 1—From Receiver-Dryer-to-Condenser Hose 2—Cap Screw (6 used) 3—Condenser-to-Compressor Hose 3. Disconnect hoses (1 and 3) and remove six cap screws (2) and remove condenser. Close all openings using caps and plugs. 4. Install condenser.

Tighten cap screws. 5. Connect lines (1 and 3). 6. Install new receiver-dryer if system is purged or flushed. (See Remove and Install Receiver-Dryer in this group.) 7. Apply refrigerant oil to new O-rings connect lines. 8. Add oil. (See R134a Component Oil Charge in this group.) 9. Evacuate air conditioning system. (See Evacuate R134a System in this group.) 10. Charge the air conditioning system. (See Charge R134a System in this group.) CED,OUTX547,183 –19–16APR99–1/1 TM1859 (14JUL04) 18-1830-38 700H Crawler Dozer 071404 PN=482