John Deere 700H Crawler Dozer — Wiper Seals and Seals, Replace

Remove and Install Wiper Seals on Hydraulic Control Valve Sections Hydraulic System NOTE: Do cap ends first and the tang ends second. Before doing cap ends, hold tang ends together by placing a rod/screwdriver through tang ends connecting linkage holes. 1. Remove screws (1) to remove retainer plate (2) from valve section. 2. Use an O-ring pick to remove wiper seal (3) and lip seal (4). 1—Screw (2 used) 2—Retainer Plate 3—Wiper Seal 4—Lip Seal 5—Spool T118812 –UN–10DEC98 Continued on next page CED,TX03399,6078 –19–31MAR00–1/5 32 3260 10 TM1859 (14JUL04) 32-3260-10 700H Crawler Dozer 071404 PN=562