John Deere 700H Crawler Dozer — Disassemble and Assemble

Track System NOTE: Single and double flange rollers are of the same design. Disassembly procedures are the same for both types of rollers. 01 0130 1. Remove plug with O-ring to drain oil from roller. 22 2. Remove lock from inner collar before putting roller assembly in press. 3. Use a 35 mm disk (1) and press to compress the metal face seals slightly. Remove the snap ring (2) from both sides of roller shaft (3). 1—Disk 2—Snap Ring (2 used) 3—Roller Shaft T80426 –UN–26OCT88 CED,TX03399,5943 –19–24MAR00–2/12 4. Remove outer and inner covers (1), if damaged replace roller. NOTE: Metal face seals are a matched set. Seals are not interchangeable with other seals. 5.

Remove metal face seal from inner and outer covers. T80427 –UN–26OCT88 1—Outer and Inner Cover Continued on next page CED,TX03399,5943 –19–24MAR00–3/12 TM1859 (14JUL04) 01-0130-22 700H Crawler Dozer 071404 PN=72