John Deere 700H Crawler Dozer — Disassemble and Assemble

Track System 14. Push seal ring and O-ring into bore using tool (1). After O-ring (2) is pushed past retainer lip, turn tool clockwise and counterclockwise to seat O-ring uniformly. Install seal rings and O-rings in the outer and inner collars using the same procedure. 01 0130 25 15. Check to make sure seal ring is sitting squarely in bore. Make sure rubber seal is seated uniformly in seal bore below the retainer lip. T80577 –UN–26OCT88 1—JDG204 Seal Installation Tool 2—O-Ring CED,TX03399,5943 –19–24MAR00–9/12 16. Wipe metal seal rings dry with a lint free tissue. 17. Apply a thin film of oil, as used in the roller, to the shiny sealing area on metal seal rings. 18.

Be sure the rubber seals are free of oil. T80578 –UN–26OCT88 Continued on next page CED,TX03399,5943 –19–24MAR00–10/12 TM1859 (14JUL04) 01-0130-25 700H Crawler Dozer 071404 PN=75