John Deere 700H Crawler Dozer — Disassemble and Assemble

Track System 10. Install new O-ring on shaft groove (1). 11. Clean seal bore in bushing case, inner collar, and outer collar using a volatile, non-petroleum base type solvent. Make sure seal bores are clean and dry. 01 0130 24 T6018BA –UN–26OCT88 1—O-Rings CED,TX03399,5943 –19–24MAR00–6/12 IMPORTANT: The metal face seal must be extremely clean during assembly. Use a volatile, non-petroleum base type solvent to clean the metal seal ring (2) and rubber seal (1). DO NOT keep the rubber seal in a volatile, non-petroleum base type solvent for more than one minute. Wipe the seals dry with lint-free tissue to remove finger prints and foreign material. T80574 –UN–26OCT88 12.

Install rubber seal (1) on the metal seal ring (2). Make sure the rubber seal sits evenly on metal seal ring. 1—Rubber Seal 2—Metal Seal Ring CED,TX03399,5943 –19–24MAR00–7/12 NOTE: A volatile, non-petroleum base solvent or talcum powder may be used as a lubricant. Solvent MUST NOT damage the O-rings or leave an oil residue. 13. Install seal assembly in the JDG204 Seal Installation Tool (2) so tool lip is between seal ring flange (1) and O-ring (3). T6077AV –UN–26OCT88 1—Seal Ring Flange 2—JDG204 Seal Installation Tool 3—O-Ring TM1859 (14JUL04) 01-0130-24 700H Crawler Dozer Continued on next page CED,TX03399,5943 –19–24MAR00–8/12 071404 PN=74