John Deere 700H Crawler Dozer — Assemble to Turn Bushings and Lubricate Chain

Assemble Lubricated Track Chain to Turn Bushings and Lubricate Chain Track System 01 0130 CAUTION: Prevent possible injury from unexpected machine movement. Make sure all control levers of press are in the NEUTRAL position. 38 T96272 –UN–27OCT88 1. Assemble track using following track press tool sets. Tooling Set A2656-141 2. Apply a mixture of 50% alcohol and 50% water to stopper (A) and install using JDG188 Stopper Installer (B). A—Stopper B—Stopper Installer CED,TX03399,5953 –19–24MAR00–1/14 3. NOTE: The pin end halves of master split link must be temporarily assembled to bushing end halves of link for proper positioning on plungers.

Pin end halves will have to be separated later for installation at end of chain. Split links are a matched set and must be assembled as a set. T96273 –UN–27OCT88 Assemble master split link halves using master shoe bolts and washers (as required). Tighten bolts just enough to hold links together. 4. Install assembled split links on ram plungers. A—Bushing B—Saddle 5. Install bushing (A) in front seat of saddle (B) so the mark is 180 ° opposite original location to expose a new wear surface. Continued on next page CED,TX03399,5953 –19–24MAR00–2/14 TM1859 (14JUL04) 01-0130-38 700H Crawler Dozer 071404 PN=88