TCD 2015 Cylinder head I 01-06-04 Renewing the valve guide (oversize, pressed version) Commercial available tools: – Reamers – Plug gauges – Cylinder head machining tool – Press – Press-out pin – Press-in pin – Industrial vacuum cleaner W 01-05-01 W 01-06-03 Danger! Danger of injury, do not touch supercooled components or the liquid nitrogen! Wear protective gloves and glasses! Attention! The press-in process must be carried out without interruption as a result of the tem- perature difference between the cylinder head and the valve seat insert. The necessary work steps must be practi- sed before pressing in.
– Nitrogen (liquid) 6 The relevant manufacturer’s specifications must be observed when working with the cylinder head machining tool. Checking the valve guide Check valve guides. W 01-06-03 Check valve guide with plug gauge (1). P01 14 1 P01 15 The target area of the plug gauge must be able to move upwards and downwards with light suction. © 39737-1 © 06/2006 8159-001 1/6