Deutz TCD 2015 — OBJ BUCH-190-001

TCD 2015 Cylinder head I 01-06-04 Pressing out valve guide Press out valve guide with press-out pin (1). 1 6 © 39749-1 Check housing bore for valve guide Visually inspect housing bore (arrow). If the housing bore is heavily scored, the housing bore must be reamed to the next oversize dimension. Check housing bore for valve guide with plug gauge (1). P01 05 P01 06 P01 07 The target area of the plug gauge must be able to move upwards and downwards with light suction. 1 The no-go limit of the gauge plug must not fit into the housing bore. If the no-go limit fits, it must be reamed to the next oversize. When the wear limit of the 2nd oversize stage is reached, the cylinder head must be renewed.

© 39750-1 © 06/2006 8159-001 2/6 e ext © 36630-1