Deutz TCD 2015 — OBJ BUCH-190-001

TCD 2015 Cylinder head I 01-06-04 Prepare housing bore for the valve guide (oversize) Clamp cylinder head on cylinder head machining tool. Seal coolant channels. Align cylinder head. 6 © 39751-1 Align bore unit and mandrin guide (1) with the hous- ing bore. The housing bores can have different dia- meters, a suitable mandrin guide for align- ment with the bore unit must therefore be selected. The mandrin guide must move easily in the housing bore without noticea- ble resistance. 1 © 39752-1 Ream housing bore to oversize level. P01 06 P01 07 Attention! The reamer has a left twist and must always be turned in or out in clockwise direction. Never turn reamers anti-clock- wise.

The cuttings resulting from removing the material can get stuck and damage the cutting. Blow out housing bore with compressed air. © 39753-1 © 06/2006 8159-001 3/6