TCD 2015 Cylinder head I 01-07-09 The valve guides can have different diame- ters, a suitable mandrin guide for alignment with the bore unit must therefore be selec- ted. The mandrin guide must move easily in the valve guide without noticeable resi- stance. 1 Align bore unit and mandrin guide (1) with the hous- ing bore. 6 © 39746-1 Bore housing bore to oversize level. Attention! The valve seat insert support (arrow) must not be machined with the cutting tool. Remove chips thoroughly. © 36624-1 Measure housing bore with internal measuring de- vice. P01 03 P01 04 © 39747-1 © 06/2006 8161-001 5/8