TCD 2015 Cylinder head I 01-07-09 Press in valve seat insert Mount cylinder head. Select valve seat insert to fit housing bore. P01 21 P01 22 P01 23 P01 24 6 © 39748-1 Supercool valve seat insert in liquid nitrogen. Use a suitable container for the liquid nitro- gen and a suitable tool for inserting and removing the components. At the beginning of the metal cooling, the liquid nitrogen boils strongly, the bubbling up process continues until the metal parts have reached the temperature of the liquid nitrogen (-196 °C). The valve seat insert has the correct tem- perature if the bubbling up process of the nitrogen has finished. © 36623-1 Push valve seat insert (1) onto press-in pin (2).
Note installation position. The valve seat surface must point to the press-in pin. 2 1 © 36643-1 © 06/2006 8161-001 6/8