Deutz TCD 2015 — OBJ BUCH-190-001

TCD 2015 Drive system W 02-01-04 Remove top thrust ring halves (arrows). 6 © 40595-0 Measure thickness of the top and bottom thrust ring halves. Note measured value, dimension (b). Determine thickness of the new thrust ring halves. P02 35 P02 36 P02 37 © 43504-0 Select new thrust ring halves according to calculated value. © 06/2006 8163-001 3/6 Calculation example Desired: Thickness of the new thrust ring halves Given: (x) = thickness for standard, oversize level 1 and 2 (y) = axial backlash (nominal) (values from the technical data) Measured: (a) = 0.4 mm axial backlash (actual) (b) = 3.26 mm (thickness of the old thrust ring halves) Calculation:

(x) - (b) = (c) 3.36 mm - 3.26 mm = 0.1 mm Dimension (a) - Dimension (c) Result: = 0.3 mm Value must be within the given axial backlash (y).