TCD 2015 Drive system W 02-01-04 Install upper thrust ring halves according to meas- ured axial clearance. Oil grooves (1) of the thrust ring halves face the crankshaft web face (2). Insert thrust ring halves between crank- case and crankshaft web (arrow). 2 1 6 © 40596-0 Fix thrust ring halves with a little grease to the bear- ing cap. Install lower thrust ring halves according to meas- ured axial backlash. Use thrust ring halves with guide lug (arrow). The oil grooves (1) face the crankshaft web face. Bearing cap has identification “3“. 1 © 40489-0 Insert bearing cap (1). The identification "3" on the bearing cap must be legible from the flywheel side. Align bearing cap.
Press the crankshaft to the flywheel side first and then in the opposite direction. 1 © 40598-0 © 06/2006 8163-001 4/6