Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil temperature to go down before performing this operation. 1. Open the inspection window at the rear left side of the machine. 2. Pull dipstick (G) out, then wipe the oil off with a cloth. where a click is heard), then pull it out again. (G). If the oil level is below the L mark, add oil through oil filler port (F). 6. If the oil level is correct, tighten oil filler cap (F) securely and close the inspection window. 3 - 80 3. Insert the dipstick (G) aga in fully in the dipstick tube (to a point 4.

The oil level should be be tween the H and L marks on dipstick 5. If the oil is above the H m ark, loosen drain plug (P) and drain the excess oil. Do not simply let the oil dr oil into an oil container. Use the dipstick to check ain out. Use a vinyl hose to drain the the oil level again. REMARK When checking the oil lev el after the engine has been operated, wait for at least 15 minut es after stopping the engine before checking. gle, make it horizontal before checking. If the machine is at an an