. OPERATION OPERATION CHECK BRAKE OIL TANK LEVEL, ADD OIL CAUTION NOTICE Check the oil level with the brake accumulator discharged. REMARK 3 - 81 When adding oil to the brake oil t ank, always use the recommended oil given i n "U SE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPE 1. Check the oil level using gauge (2) (for brakes) on t gauge (1) (for brake cooling) he side face of the brake tank and near the rear frame center pin o There are two brake tank machine for brake cooling machine for the brakes. Check that the oil level in t Oil level in brake cooling t n the left side of the machine. s:
Tank (A) on the outside of the and tank (B) on the inside of the he tank is at the following positions. ank (A): Between Hi and LOW level on gauge (1) Oil level in brake tank (B): Between Hi and LOW level on gauge (2) gine stopped and the brake pedal d epressed several times until t he oil pressure sound disappears an d the pressure is released. 2. If the oil level is low, op en the cover at the top left o f the platform, open tank cap (3 oil level is low, then add o ) of the tank on the side wher e the il. NOTICE If the oil level is low, add oil to the tank on the side where the level i s low, and check for oil leakage from the brake piping line for that tank.