. OPERATION OPERATION 1. 2. To warm up the hydraulic oil (only in cold weather), do as follows. During the warming-up operation, check that the engine equipment lock lever to control lever into maximum of 10 reach the relief the water If 3 - 95 NORMAL OPERAT ION After the engine starts , do not start operatin g the m achine imm ediately. First, carry out the follo wing operations and checks. NOTICE ate the engine before the warming-up operation is completed. low idle or high idle continuously for more than 20 minutes.
Do n ot suddenly acceler ate the engine before t he warming-up opera tion is Do n ot run the engine at low idle or high idle co ntinuous ly for more than 20 If it i s necessary to run t he engine at idle, apply a load fr om time to t ime or run the engine at a mid-range Depress accelera no load at midran tor pedal (1) lightly a ge speed for about 5 the FREE positio and out of the TIL Keep the relief tim seconds. In this way, the hydraulic oil will r pressure and will be warmed up more quickly. 3.
After completing the warming-up op eration, instruments, gaug es, and pilot lamps work pro If any problem is f ound, carry out repa Carry out the op eration under light l temperature gaug gauge (3) on the e (2) and torque co multi monitor screen nverter enter th oil temper e green ra 4. Check for abnorm any problem is fo al exhaust gas colo und, contact your Ko r, noise matsu d , or vibrati istributor.