Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE REMARK 4 - 22 REPLACING INNER ELEMENT 1. First r emove the outer ele ment, a nd then remove the i nner element 2. Cove r the air connector s ide (outlet s ide) with a c lean cloth or tape. 3. Clean the inside of the air cleane r body, t hen remove the c over installed in Step 2. 4. Fit a new inner e lement t o the connector and tighten it with nuts. NOTI The i nner e lement mus t no t be us ed again eve n afte r cleanin g. Wh en replacing the outer elemen t, replace the inner elemen t at the same time. 5. I nstal l the outer element a nd the cover.

For element attached hould be the shaking m otion o f element in t he way that the sealing rubbe r of t he tip of t he element closely contact with the i nside of th e bod