Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE be increased and the nuts in the (150 to 185 kgm, 1085 to 1338.1 lbft) 2. If any stud bolt is broken, replace all the stud bolts for that wheel. CLEAN ELEMENT IN AIR CONDITIONER RECIRCULATION FILTER After rinsing the filter, dry it completely before installing it 4 - 56 CHECK FOR LOOSE WHEEL HUB NUTS, I f wheel hub nuts ( accidents may be c 1. Check for loose nuts, and tighten if necess When checking for loose nuts, always tu ening to check. e: 1470 to 1810 Nm direction of tight Tightening torqu 1. Open the filter i nspection cover, remove th e filter cover, then remove the filter in the direction of the arro When removing seat, and push 2.

Clean with comp ressed air in the same way as for the fresh air filter. If the filter is ext remely dirty, rinse it in wate CHECK FRAME AND LIFT ARM 1. 2. 1. Wash the frame and lift arm so that the ch eck can be carried out easily. of the frame and lift arm for damage. 2. Check all parts of the frame and lift arm for In particular, ch eck the parts marked in co If any crack or o ther damage is found, repa For details of Komatsu distrib