Komatsu — EVERY 500 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4 - 59 6. remove the cov er. When doing when removing the bolts to under the force Remove spring element (7). 8. Check that ther aterial inside then clean the i nside of the case. 9. Install a new el ement, then set b ypass spring 5), and cover (4) in the filter case. When doing t his, if the cover O-ring is damag ed or deteriorate d, replace th e O-ring. 10. Hold down the c over and tighten t he mounting bolts uniformly. 11. Run the engine at idle for a short time, t hen c heck that the oil is up to the specified level. For d etails, see "CHECK TRANSMISSIO N OIL LEVEL, AD D OIL (PAG E 4-26)". cover he co ver down filter case,