Komatsu — EVERY 500 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE BRAKE OIL FILTER ELEMENT WARNING to 4 - 60 The pa rts and oil a re at high temperature a fter the en gine is stopped, and may cause serious burns . Wait for the tem perature to go d own before cleaning the e ngine breather. When using compr essed air, ther e is a hazard that di rt may be blow n up and cause serious injury. Alway s use safety glasses, dust mask, or other prote ctive equipmen 1. Set the contain er directly under the brake oil drain valve catc h the oil. 2. Ope n inspectio n cover (1) a t the top left of th e machine, th remove oil filler caps (F) and plugs ( 2) and (3) in the center the f ilter cover. nder the 3.

Remove drain plug (4), the n loose n plug (5 ) gradually a drain the oil fro m the brake oil tank u ntil it rea ches the botto of si ght gauge ( 6). plug (7), then loosen plug (8) gradually a 4. Remove drain drain the oil fro m the brake c ooling o il tank un til it reaches t bottom of sight gauge (9). 5. After plug draining th s (4) and (7 e oil, tighten plugs (5) and (8), then install dra ).