. MAINTENANCE SERVICE PROCEDURE REPLACE BYPASS OIL FILTER ELEMENT WARNING engine is stopped, and may cause burns. Wait for the filter. 4 - 65 temperat ure to go do wn before starti ng the wo When re moving the o il filler cap, turn it slowly t o release t he in ternal 1. Open inspection c over (1) at th e left side of the machine, and set the 2. Loose n clamp (2), then remove 3. Loose n knob (3), then remove housing ( 4) and O-ring (5). 4. Using a flat-head ed screwdrive r, lift the turbine assembly (6) . up ap prox. 25 mm (1 in) and w ait until th e oil flow stops. 5. When no more oil flows out, re move turb ine assembly (6)